In this guide
Map likely water sources
Walk through the building with the person responsible for maintenance. Consider areas around sinks, water-using appliances, mechanical equipment, and other known risks. Prioritize locations by the practical consequence of a leak and whether someone can respond.
Think about the water path
A sensor only helps if its sensing element encounters water under the conditions it is designed for. Review floor slope, drip trays, obstructions, and cleaning routines. A visually tidy location can be ineffective if water will flow somewhere else. Use the installation guidance for the exact sensor type.
Keep access and cleaning practical
Avoid mounting that creates a trip hazard or makes routine cleaning difficult. Record the location so cleaners and maintenance staff know the device belongs there. If a sensor or sensing cable is moved, check it again rather than assuming the original test remains valid.
Test a complete notification
Use the manufacturer’s recommended test method and confirm a report through the gateway and platform to the recipient. Decide who investigates and how to contact building maintenance. A leak notification does not shut off water unless a separately designed and confirmed control system provides that function.
PUT IT TO WORK
Your planning checklist
- Prioritize meaningful leak locations.
- Check the likely path of water.
- Keep the sensor accessible and documented.
- Test the sensing element and notification together.
Planning archive: February 2026 topic. Written and first published September 26, 2026 as part of a retrospective collection, not published in February 2026. About the library.